Share on Facebook Share on LinkedIn
INNOVATIVE FLEXIBLE EFFICIENT

Our Scene Set Switches and Control Plates are used in conjunction with the plug in and hardwired control modules and DALI devices. They allow lighting to be controlled at different levels and in different groups.


The control plate uses a Wandsworth Group Series 2 range and conform to a standard single-gang profile fitting a 25mm surface or flush mount back box. The standard plate finish is brushed stainless steel but any plate finish in the series 2 range can be supplied.


From the scene plate you can call scenes 1 – 4, raise, lower and off. The off button can also be programmed for a specific scene value. Press and hold buttons 1– 4 to control scenes 5 – 8. All scenes can be programmed by a hand-held remote or by button control on the plate. Control plates have blue LED back lighting for location and scene notification.


Connection is via CAT5 cable on the CAN network or 2 or 4 core mains cable for DALI.   2 and 4 button switch plates, which match the Scene Plates, can also be specified giving 1 or 2 gang matching switches.


A line of screwless scene set and control plates is also available in custom colours as well as the standard white and brushed stainless steel. They are available in 4-button, 2-button and 7-button configuration.

ecoLUX SCENE SET SWITCHES/CONTROL PLATES

DATA SHEETS

Control Plates

Switch Plates

CAN Scene-set Plate

DALI Scene-set Plate


CLICK HERE TO DOWNLOAD DATA SHEETS ON ALL LIGHTING CONTROLS LTD PRODUCTS