Lighting Controls manufacture a range of luminaire leads that provide a pluggable connection between an LCM and luminaires. These leads can be manufactured with a variety of plugs, such as Metway, Enstow, Wago, and Wieland to ensure compatibility with any luminaire within a building. Lengths can also vary.
The ecoLUX PIR is highly flexible and communicates with the lighting control network. Up to eight buttons can be configured to do any control task that can be performed by the PIR, including scene changes, overrides, dimming, heating control, and window blind control.
SCENE SET PLATE REMOTE
The ecoLUX 'Hand Held Scene Plate' remote performs the functions of a scene set control plate. This is used with our plug in and hardwired control modules to control different lighting groups at different levels as well as some other non-lighting functions, such as electric blinds.
These Switch Plates match our scene set plates and confirm to a standard single-gang plate profile, fitting 25mm surface or flush mounted back boxes. A Wandsworth Group Series 2 range of control plate is used and the standard finish is brushed stainless steel.
CAN SCENE SET PLATE
Our CAN Scene-Set Plates are used with our plug-in and hardwired control modules to permit the control of different lighting groups at different levels. Control Plates have blue LED back lighting for location and scene identification, and scenes can be programmed wirelessly via Bluetooth. These Scene Set Plates conform to a standard single-gang plate profile, fitting 35mm back boxes.
DALI SCENE SET PLATE
Our DALI Scene-Set Plates are used with our plug-in and hardwired control modules to permit the control of different lighting groups at different levels.
The Lighting Controls LC-DALI4IP/BB is a 4 channel switch input module powered by the DALI bus, which permits retractive or conventional two pole switches to be connected to a DALI network. Being of very low profile (8mm thick), the unit can be installed behind a standard light switch in a 28mm pattress box.