AREA CONTROLLER

The EcoLUX Area Controller enables manual duration testing of the emergency lighting system, and also provides an override 'On' facility for luminaires. These facilities are controlled by a key switch.

4 CHANNEL DALI INTERFACE

The Lighting Controls LC-DALI4IP/BB is a 4 channel switch input module powered by the DALI bus, which permits retractive or conventional two pole switches to be connected to a DALI network. Being of very low profile (8mm thick), the unit can be installed behind a standard light switch in a 28mm pattress box.

8 CHANNEL DALI INTERFACE

The ECOLUX DALI8IP is an 8 channel switch input module powered by the DALI bus, which provides 8 switch inputs enabling switching/ fire alarms and intruder alarms to be integrated onto a DALI network.

4 OR 8 PORT NETWORK SWITCH

Dedicated Network Switch for connection of cat5e or cat6 cables from each Lighting Controls networked device such as the ecoLUX Head End (LC-HEPC) and Area Controllers (LC-AC).

16 OR 24 PORT NETWORK SWITCH

Dedicated Network Switch for connection of Cat5e or Cat6 cables from each Lighting Controls networked device, such as the EcoLUX Head End (LC-HEPC) and Area Controllers (LC-AC).

AV INTERFACE 

The EcoLUX RS232AV/CAN and RS232AV/DALI provide an interface between the lighting control system and devices with an RS232 port, including audio and video equipment. 

FLOOR INTERFACE

The ECOLUX TCP/IP is installed when communication is required between floors or if a Head End graphics package is to be installed for the monitoring of the lighting control system. It enables manual duration testing of the emergency lighting system, and also provides an override ‘On’ facility for luminaires. 

6 CHANNEL DALI RELAY

THE 6R-SA is a 6 channel DALI ballast for control of multiple switched loads. It is mounted between the DALI line and a switching fitting, integrating fittings to the DALI system as well as controlling solenoid valves and HVAC. This relay unit has 4 switch inputs combined with 6 output relays.