LUMINAIRE LEADS
Lighting Controls manufacture a range of luminaire leads that provide a pluggable connection between an LCM and luminaires. These leads can be manufactured with a variety of plugs, such as Metway, Enstow, Wago, and Wieland to ensure compatibility with any luminaire within a building. Lengths can also vary.
CAN PRESENCE DETECTOR
The EcoLUX CAN Presence Detector is a sensor for automatic lighting control. It detects movement using a PIR sensor, which updates the light controller using a CAN bus interface. When an area is no longer occupied, the device times out after a configurable period. This detector features our Progressive Sensitivity Function to eliminate false triggering.
DALI PRESENCE DETECTOR
The EcoLUX DALI Presence Detector is a sensor for automatic lighting control. It detects movement using a PIR sensor, which updates the light controller using a DALI interface. When an area is no longer occupied, the device times out after a configurable period. This detector features our Progressive Sensitivity Function to eliminate false triggering.
DALI MICRO PRESENCE DETECTOR
The DALI Micro Presence Detector is a sensor for automatic lighting control. It detects movement using a PIR sensor, which updates the light controller using a DALI interface. When an area is no longer occupied, it times out after a configurable period. This detector features our Progressive Sensitivity function to eliminate false triggering.
HIGH BAY PRESENCE DETECTOR
The High Bay Presence Detector range has been designed for lighting control in areas with demanding spaces and increased mounting heights. The range is ideal for areas such as factories, sports halls and entrance halls.
CAN MICRO PRESENCE DETECTOR
The CAN Micro Presence Detector is a sensor for automatic lighting control. It detects movement using a PIR sensor, which updates the LCM using a CAN interface. When an area is no longer occupied, the device times out after a configurable period.
FLUSH MOUNT MAINS
PRESENCE DETECTOR
The EcoLUX MPIR can be flush mounted into suspended and plasterboard ceilings. Configurable for any room occupancy style, via time and lux level adjusters, a passive infra-red quad sensor detects movement of any warm body within the detection zone and a photocell monitors the ambient light level.
SURFACE MOUNT MAINS PRESENCE DETECTOR
The EcoLUX MPIR/S is suitable for mounting onto a backbox at least 16mm deep. It is configurable for any room occupancy style, via time and lux level adjusters. It switches on the lighting load if the room is occupied and if the ambient lux level is less than the chosen adjusted level. It switches of the light load if the room is unoccupied for the set time.
VOLT FREE MAINS PRESENCE DETECTOR
The EcoLUX MPIR/VF can be flush mounted into suspended and plasterboard ceilings and includes a 2m flex for ease of installation. They incorporate a passive infra-red quad sensor to detect movement within the detection zone and a photocell to monitor the ambient light level. When movement is detected and the ambient light is dark enough, the PIR switch will turn the load on.
CLEAN CONTACT PIR
The Clean Contact presence detector is a sensor for automatic lighting control. It detects movement using a PIR sensor, which updates the lighting controller using a solid state galvanically isolated clean contact interface. When an area is left unoccupied, the device times out after an adjustable period.
PHOTOCELL
The ALC15 Twilight Switch will turn artificial lighting on when the ambient light falls below a pre-set level. The artificial lighting will then be turned off either when the ambient light exceeds the pre-set level (auto off) or after a pre-set time delay (timed off).
DALI BESA PIR
The DALI BESA PIR is a sensor for automatic lighting control has been specifically designed for mounting within a besa system. It detects movement using a PIR sensor, which updates the light controller using a DALI interface.
CAN BESA PIR
The CAN BESA PIR is a sensor for automatic lighting control has been specifically designed for mounting within a besa system. It detects movement using a PIR sensor, which updates the light controller using a CAN interface.